MBOW1 - Product put on hold
| I am pleased to introduce
Dennis Murphy's MBOW1 kit. His design is highly regarded in the
DIY world because of its price, incredible smooth and detail sounding
traits that can rival commercial speakers costing many times more.
Dennis Murphy frequently visits
the Madisound.com forum. He has provided countless hours of help
and advice to anyone wishing to build their own MBOW1, or his other
projects and more. For further information about the MBOW1 or his
other great projects, I invite you to visit his website, www.murphyblaster.com
or just do a search on google using "MBOW1". I am here to fill in the gap for those who do not wish to start completely from scratch and to get your feet wet in the wonderful world of DIY speakers! |
 |
| Here is the unsmoothed on-axis frequency response measured by Dennis Murphy with 3/4" round over front baffle. |
|
|
2nd order crossover diagrams: Note that the tweeter is wired in reverse polarity. |
 |
 |
| Note that any resistors less than 0.50ohm in actuality not a resistor, but just a representation of the DC resistance of the inductor. |
|
For more information, visit Dennis Murphy's website: www.murphyblaster.com Price: TBA when presentation product is completed, but currently put on hold. Recommended places to buy the parts as per Dennis Murphy's site: Drivers required: M130 shielded or unshielded woofer ($23.95USD/ea unshielded at www.gr-research.com); for Canadians, try www.creativesound.ca M130 for $63CDN ea; Hiquphon OW1 tweeter ($90USD/ea at www.zalytron.com). Or for matched pairs of OW1 from www.ellisaudio.com Crossover: Roughly $100CDN for good parts - www.partsconnexion.com; www.e-speakers.com ; www.madisound.com
|
Home | Forums | Tube Amp | DIY Speakers | Products | DIY Tutorial | Links | About | Contact